Matching skills designed by lighting lamp manufacturers

Step 1 Choose different lighting depending on the occasion

When discussing business matters, lighting manufacturers have a special light source to keep people focused and focused on the important issue. All lights should be turned on to help calm thinking. When the relationship enters the chatty stage, the indirect light on the ceiling can be turned off, leaving only the chandelier with a concentrated light source. When the surrounding light dimmed, people will be involuntarily relaxed, light changes will indirectly affect people's mental state.

2. Application of indirect light source

The use of indirect light sources can avoid glare caused by direct light. In the design, hidden light sources can be placed around the ceiling, and local lighting can be enhanced when reading or using a computer. Indirect lighting is the most comfortable and relaxing light source. The lighting design that sees the light but not the light makes leisure activities at home easy and comfortable.

3. Reduce the use of fluorescent lighting

Fluorescent lights are usually fluorescent lights that do not light up immediately after being turned on, but rather wait a few seconds before lighting up. For example, common tubes are standard fluorescent lamps. Avoid using the bulb where it is often turned on and off, as this can cause wear and tear.

The low energy consumption and long service life of LED lights have been recognized by the public. When designing indoor lighting, the application of LED lighting should be fully considered.

1. Locate the light

Because the Wenlv lighting project is the construction of new lights after the completion of the bridge, the lighting project is mainly to highlight the shape of the bridge, to achieve the purpose of beautifying the city night scene.

The layout of Wenlv lighting project directly affects the actual effect of bridge lighting and the difficulty of maintenance management. The lamps on both sides of the bridge are arranged too high, and the light radiation and reflection effect are not obvious. At the same time, if the lamp is placed too high, it is easy to be damaged by the outside world, security risks and operation and maintenance costs increase. The installation position of lamps and lanterns is low, the construction operation and later maintenance is more difficult, the bridge is affected by light, the long-distance effect is poor.

2. Layout of cable tray and trough

When laying the bridge and pipeline on the bridge, pay attention to the damage and impact of the existing bridge structure when installing the bridge and pipeline support. Therefore, in the construction of lighting engineering, the waste holes generated in the process of bracket installation should be sealed with epoxy mortar in time to reduce the damage to the structure.

3. Installation of lamps and equipment

Lighting equipment installed in Wenlv lighting project is different from general lighting fixtures. Most of them operate in the open air. In the process of cultural tourism lighting project and equipment installation, it is necessary to fully protect the lighting equipment line from aging and rain, and wait for work.

4. Anti-theft facilities for lamps and equipment

The Wenlv lighting project is the construction work of the new lighting installation project outside the existing structure. The new additions are bare installations, some of the lights are small in number, and are inevitably subject to outside damage and influence. In order to maintain the safe use of the bulbs and minimize damage, safety fences and shields have been added to certain bulbs and necessary protection has been provided for the bulbs and pipes to minimize human damage.